UNIZOR-M Concentrated Synthetic Cutting Fluid
Standart class
Features:
Is a well-known Ukrainian brand that has gained confidence of more than 700 regular customers. It is exported to Moldova and EU countries.
Sphere of Use:
Multi-purpose 3–5 % cutting fluid for various types of abrasive processing, edge-cutting machining, deformation processing of all steel grades and non-ferrous alloys. It is highly resistant to hard water and segregation.
Advantages:
- аccording to the customer feedback: "fill-and-forget" – it ensures the long-life performance (without replacement), rot-proof;
- overprotects equipment and parts against corrosion, particularly in very hard water;
- increases processing performance (on average by 1.3 times);
- improves quality of the processed surface (by 1 roughness grade);
- non-segregating and requires only correction of decreasing quantities;
- easy disposal of the used cutting fluid, wastewater disposal allowed;
- concentrate is non-combustible and retains its properties at low temperatures;
- provides detergency effect for cleansing machine tool surfaces;
- provides in-process preservation of treated parts;
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.
- аccording to the customer feedback: "fill-and-forget" – it ensures the long-life performance (without replacement), rot-proof;
- overprotects equipment and parts against corrosion, particularly in very hard water;
- increases processing performance (on average by 1.3 times);
- improves quality of the processed surface (by 1 roughness grade);
- non-segregating and requires only correction of decreasing quantities;
- easy disposal of the used cutting fluid, wastewater disposal allowed;
- concentrate is non-combustible and retains its properties at low temperatures;
- provides detergency effect for cleansing machine tool surfaces;
- provides in-process preservation of treated parts;
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.
UNIZOR-M , “Pipe” modification Concentrated Synthetic Cutting Fluid
Standart class
Features:
It is used at more than 60 % facilities of this industry in Ukraine, exported to Moldova,
“invisible” preservation not requiring depreservation.
Sphere of Use:
5 % working solution of cutting fluid provides the full cycle of manufacturing electric-welded pipes and full cycle of manufacturing electric-welded and shaped pipes, including their preservation for 1-3 months during warehouse storage and transportation
The analogue substitute:
Alter Tube 0020
Advantages:
- versatility (one solution for all stages of pipe production);
- high resistance of process tooling and stable dimensions of the formed section;
- considerable economic effect due to durable service without replacement;
- unique preservation properties, “invisible” preservation not requiring depreservation;
- finished articles comply with export requirements for rolled stock supply to EU countries;
- minimal specific consumption of the concentrate per 1 ton of pipes;
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.
- versatility (one solution for all stages of pipe production);
- high resistance of process tooling and stable dimensions of the formed section;
- considerable economic effect due to durable service without replacement;
- unique preservation properties, “invisible” preservation not requiring depreservation;
- finished articles comply with export requirements for rolled stock supply to EU countries;
- minimal specific consumption of the concentrate per 1 ton of pipes;
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.
RIMOL Concentrated Synthetic Cutting Fluid
Premium class
Features:
Premium class synthetic cutting fluid with extra-long life and high technological properties. Cost-saving at the stage of usage.
Sphere of Use:
Multi-purpose 3–5 % cutting fluid for all types of machining, including for very difficult-to-machine steel grades.
Advantages:
- successful application at the high-technology leading plants of Ukraine,
- long-life performance up to 1 year and more,
- cost advantages at the stage of usage,
- concentrate is non-segregating and withstands low temperatures.
- possibility to process particularly difficult-to-machine steel grades (stainless, heat-resistant, tool) with high processing quality,
- reliable corrosion protection and bio-resistance, including in very hard water and with additives of NaCl,
- easy disposal of the used cutting fluids,
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.
- successful application at the high-technology leading plants of Ukraine,
- long-life performance up to 1 year and more,
- cost advantages at the stage of usage,
- concentrate is non-segregating and withstands low temperatures.
- possibility to process particularly difficult-to-machine steel grades (stainless, heat-resistant, tool) with high processing quality,
- reliable corrosion protection and bio-resistance, including in very hard water and with additives of NaCl,
- easy disposal of the used cutting fluids,
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.
RIMOL, modif eur Concentrated Synthetic Cutting Fluid
Premium class
Features:
Cutting fluid of “premium” class having no specific odor, personnel-friendly.
It is exported to the EU countries.
Successfully substitutes cutting fluids of European brands.
Sphere of Use:
Multi-purpose 4–5 % cutting fluid for various types of abrasive processing, edge-cutting machining, deformation processing of all steel grades and non-ferrous alloys.
Advantages:
- 100 % and more cost advantage when substituting European cutting fluids;
- High: performance and technical characteristics of processing;
- Absence of characteristic odor and complaints of the operating personnel;
- Product quality is confirmed by the EU consumers;
- Non-segregating and bio-resistant;
- Absence of mineral oil in the composition provides easy disposal of the used cutting fluid;
- Additional cost advantages due to extended usage;
- Is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.
- 100 % and more cost advantage when substituting European cutting fluids;
- High: performance and technical characteristics of processing;
- Absence of characteristic odor and complaints of the operating personnel;
- Product quality is confirmed by the EU consumers;
- Non-segregating and bio-resistant;
- Absence of mineral oil in the composition provides easy disposal of the used cutting fluid;
- Additional cost advantages due to extended usage;
- Is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.
EkoEm -3 Concentrated Semi-Synthetic Coolant
Premium class
Features:
The composition of the coolant corresponds to modern trends of European manufacturers.
White emulsion habitual for the operating personnel, used for standard kinds of machining with prominent lubricating properties.
Successfully used in operations of cutting and deformation processing, including for aluminum and non-ferrous alloys.
Sphere of Use:
multi-purpose 5 % emulsion for various types of abrasive processing, edge-cutting machining, deformation processing of all kinds of steel grades and non-ferrous alloys.
Advantages:
- prominent lubricating properties ensure high indicators of processing and tool durability during cutting and deformation processing;
- good processing of viscous aluminum and non-ferrous alloys;
- easy preparation and use;
- conventional white emulsion and favorable feedback of the operating personnel;
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.
- prominent lubricating properties ensure high indicators of processing and tool durability during cutting and deformation processing;
- good processing of viscous aluminum and non-ferrous alloys;
- easy preparation and use;
- conventional white emulsion and favorable feedback of the operating personnel;
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.
EkoEm -1 Concentrated Semi-Synthetic Coolant
Standart class
Features:
White emulsion habitual for the operating personnel, used for standard kinds of machining with prominent lubricating properties.
Successfully used in operations of cutting and deformation processing, including for aluminum and non-ferrous alloys.
Sphere of Use:
multi-purpose 4–5 % emulsion for various types of abrasive processing, edge-cutting machining, deformation processing of all kinds of steel grades and non-ferrous alloys.
Advantages:
- prominent lubricating properties ensure high indicators of processing and tool durability during cutting and deformation processing;
- good processing of viscous aluminum and non-ferrous alloys;
- contains no nitrosating agents;
- easy preparation and use;
- conventional white emulsion and favorable feedback of the operating personnel;
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.
- prominent lubricating properties ensure high indicators of processing and tool durability during cutting and deformation processing;
- good processing of viscous aluminum and non-ferrous alloys;
- contains no nitrosating agents;
- easy preparation and use;
- conventional white emulsion and favorable feedback of the operating personnel;
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.
ROKSOL Concentrated Semi-Synthetic Cutting Fluid
Premium class
Features:
Innovative cutting fluid of “premium class” has extra high lubricating properties due to lubrication synergism at the colloid, semi-colloid and chemical levels. But at the same time it has also excellent detergent properties. It provides reliable corrosion and biological protection.
Sphere of Use:
Multi-purpose 3–5 % cutting fluid for various types of abrasive processing, edge-cutting machining, deformation processing of all kinds of steel grades and non-ferrous alloys.
It substitutes the best cutting fluids of European manufacturers.
Advantages:
- multi-purpose 3–5 % cutting fluid for various types of abrasive processing, edge-cutting machining, deformation processing of all kinds of steel grades and non-ferrous alloys,
- it substitutes the best cutting fluids of European manufacturers,
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.
- multi-purpose 3–5 % cutting fluid for various types of abrasive processing, edge-cutting machining, deformation processing of all kinds of steel grades and non-ferrous alloys,
- it substitutes the best cutting fluids of European manufacturers,
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.
FERROBETOL-M Concentrated Mineral Cutting Fluid
Standart class
Features:
High-quality emulsol with increased content of mineral oil (up to 65 %) and, respectively, extremely high lubricating properties.
It provides increased processing speed and performance, as well as tool durability, in particular during difficult machining and deformation processing. To ensure the long-term service it is necessary to stir thoroughly the concentrated emulsol with water during preparation of the emulsion.
Sphere of Use:
Multi-purpose emulsol for all types of difficult machining, including for deep drilling, milling, thread machining, wire drawing, deformation finning of pipes.
Advantages:
-superior lubricating properties ensure high processing performance and tool durability during cutting and deformation processing
-successful processing of viscous aluminum, non-ferrous and stainless alloys
-it is applied for wire drawing in cable industry
-long-term service, corrosion and biological protection
-contains no nitrosating agents in its composition
-protective, sealing properties for processed products and operating personnel
-superior lubricating properties ensure high processing performance and tool durability during cutting and deformation processing
-successful processing of viscous aluminum, non-ferrous and stainless alloys
-it is applied for wire drawing in cable industry
-long-term service, corrosion and biological protection
-contains no nitrosating agents in its composition
-protective, sealing properties for processed products and operating personnel
TEHMOS - 2 Concentrated technical detergent
Standart class
Features:
High-efficient, low-foaming and low-temperature technical detergent
Sphere of Use:
depreservation, cleansing, removal of stubborn stains in machine-building, preparation of parts for coating, during repair of railway equipment.
Advantages:
-no need to heat the detergent solution and abrasive-mechanical action
-in-process anticorrosive protection of the cleaned parts
-low specific consumption and long-life performance
-it is certified as a biodegradable material and is easily disposed,
-low emulsifying capacity of oil impurities and contaminants that are easily removed from the solution surface,
-higher efficiency and quality of surface cleansing as compared to standard detergents,
-successful low-foaming washing in jet washing machines, including high pressure washers,
-provision of washing prior to apply electroplating, paint coatings and phosphatizing.
-no need to heat the detergent solution and abrasive-mechanical action
-in-process anticorrosive protection of the cleaned parts
-low specific consumption and long-life performance
-it is certified as a biodegradable material and is easily disposed,
-low emulsifying capacity of oil impurities and contaminants that are easily removed from the solution surface,
-higher efficiency and quality of surface cleansing as compared to standard detergents,
-successful low-foaming washing in jet washing machines, including high pressure washers,
-provision of washing prior to apply electroplating, paint coatings and phosphatizing.
