Concentrated semi-synthetic emulsion of “Standard class” with moderate content of mineral oil (up to 25 %).
4–5 % treatment emulsion of conventional white color provides higher lubricating properties during operations of cutting and deformation processing, including for aluminum and non-ferrous alloys.
EcoEm-1 is the golden mean of specifications for cutting fluids: good lubricating properties similar to emulsols and high cooling properties similar to synthetic cutting fluids.
EcoEm-1 is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the using as a part of the coolant formaldehyde and boron salts.

Technological properties:
Corrosion preventing
Resistance to biological defeat
Stability on hard water

Technological operations:
lathe turning, cutting, milling, thread cutting, reaming, grinding, deformation processing, drawing, rolling

Processed materials:
low-alloyed steel grades, cast iron, high-alloyed steel grades, stainless steel grades, aluminum alloys, non-ferrous alloys

Calculation for the concentration of 5%, excluding the cost of water

canister, l: 10
barrel, l: 50, 200

Additional information
Appearance white to cream color opaque liquid
Smell characteristic, not irritating
Density at temperature (20+/-1) ºС, g/cm3 0,930-1,090
Relative viscosity as per ВЗ-246 viscosity meter with nozzle diameter 4 mm at temperature (20+/-1) ºС, sec, not less 12
Potential of hydrogen ion (рН) of water solution with the concentrate mass fraction 5 %, рН 9 units pH 8,2-9,9
Anticorrosive properties: (according to GOST 6243 cl.2). Working solution 5 %, mixed with water of 21 mmol/m3 hardness Braves
Water solution stability with 5 % concentrate mass fraction (layer separated on the solution surface within 3 hours), %, not more 1
Concentrate stability during storage withstands
  • Prominent lubricating properties ensure high indicators of processing and tool durability during cutting and deformation processing
  • Good processing of viscous aluminum and non-ferrous alloys
  • Contains no nitrosating agents
  • Easy preparation and use
  • Conventional white emulsion and favorable feedback of the operating personnel.

EcoEm-1  is a concentrated semi-synthetic cutting fluid of "Standard class":

  • EcoEm-1 Concentrate  is recommended for application as 4–5 % water solution of multi-purpose cutting fluid when processing various ferrous, non-ferrous metals and their alloys.
  • High lubricating properties inherent in this modification provide high durability of the cutting tool and quality of the processed surface and enable to recommend it for application in the numerous critical manufacturing operations (including at the automated machining centers) of edge-cutting machining and abrasive processing:
  • "EcoEm-1" is the “golden mean” of specifications for cutting fluids: high lubricating properties similar to emulsols and high cooling properties similar to synthetic cutting fluids.
  •  low toxicity hazard - according to the conclusion of the Ministry of Health of Ukraine it is referred to class 4 of hazard.
    Due to the low content of emulsified oil (up to 20 %) treatment emulsion contaminated the air of the working area with oil aerosol much less, which provides its compliance with modern hygienic requirements. The operating personnel are satisfied with EcoEm used in operation and indicate high service characteristics of the cutting fluid.
  • Concentrated cutting fluid is non-combustible and can be stored without hazard requirements.
  • Simple and easy preparation: this cutting fluid is easily mixed with cold tap water in 4–5 % concentration, forming emulsion of deep opaline color; no heating, additional components and expenses are required



  • We ensure professional selection of products, which saves up to 30 % of the resources. The result of our manager’s work is not only a solution to technological problems, but also significant cost savings due to the use of our products.
  • We render assistance during product introduction. Our experts are always ready to address any issues related to application of our products in your business environment.
  • We provide service backup and testing using our own laboratory. If necessary, our laboratory will render laboratory services free of charge.
  • We are ready to modify our products under customer’s specifications. If necessary, we are ready to tackle your technical problem on an individual basis and modify the product specifically for your production process.
  • We provide free samples for testing.
  • We work quickly and efficiently – it takes us 30 minutes to issue an invoice and maximum 2 days to deliver products within the territory of Ukraine.
  • We sell products starting from 10 liters to a tank truck. 
  • Products are never out of stock.
  • We provide immediate expert advice on any issues arising during application of our products. We assign an experienced skilled professional for each customer. We are ready to visit your production facilities in an emergency.


why it is profitable
to work
Over 1,000 companies trust us
AT "SCF Ukraine" (public)
PJSC "ArcelorMittal Krivoy Rog"
LLC "Interpipe Niko Tube"
JSC «Minsk Bearing Plant»
Ltd. "Motordetal-Konotop"
State Concern "Ukroboronprom"
PJSC "Novokramatorsk Engineering Works"
GP Research and Production Complex "Zorya" - "Mashproekt"
JSC "Motor Sich"
PJSC Kharkov Tractor Plant
JSC "Hydrosila GROUP"
State Enterprise "Gosudarstvennoye the Kiev KONSTRUKTORSKOE Bureau" Luch "
ДП "Завод ім. В.О. Малишева"
 The official government enterprise "NPK" Iskra "
PJSC "Sumy Frunze NPO"
PJSC "Kremenchug Wheel Plant"
JSC "Minsk Wheel Tractor Plant"
PJSC "Druzhkovsky metiznyj plant"
Kharkiv plant «Mashgidroprivod»
JSC «Nowy Styl»
State Enterprise Plant "Electrotyazhmash"
LLC "Azov Cable Company"