ASFOL-1, modif. "EUR" Multi-purpose oil cutting fluid
Premium class
Features:
The product is based on imported components and is adapted for forced processing modes. ASFOOL-1, modif. "Euro" has higher tribological and consumer properties, close to European counterparts, and successfully replaces imported oil coolant with modern equipment.
Sphere of Use:
multi-purpose cutting oil for difficult machining and deformation processing of various metals and alloys at automated and semi-automated machine tools, etc.
The analogue substitute:
Valona MQL 3046
Advantages:
-it enhances quality of the processed surface on average by 1 roughness grade (as compared to the domestic analogues)
-cost advantages of 100 % and more when substituting oil cutting fluids of EU countries
-high lubricating properties ensure processing with high performance and tool durability
-it has no toxic properties inherent in sulfofresol
-it is fumeless during processing and does not deteriorate sanitary-hygienic labor conditions of machine-tool operators
-low coefficients of entrainment with cutting waste and decreased formation of oil mist provide optimal specific consumption
-long-life performance until replacement, including the effect of removed contamination and slurry sedimentation.
-it enhances quality of the processed surface on average by 1 roughness grade (as compared to the domestic analogues)
-cost advantages of 100 % and more when substituting oil cutting fluids of EU countries
-high lubricating properties ensure processing with high performance and tool durability
-it has no toxic properties inherent in sulfofresol
-it is fumeless during processing and does not deteriorate sanitary-hygienic labor conditions of machine-tool operators
-low coefficients of entrainment with cutting waste and decreased formation of oil mist provide optimal specific consumption
-long-life performance until replacement, including the effect of removed contamination and slurry sedimentation.
ASFOL-1 Multi-purpose oil cutting fluid
Standart class
Features:
Cost-advantageous cutting oil provides high processing performance, tool durability and quality of the processed surface. Successfully substitutes foreign cutting oils.
Sphere of Use:
multi-purpose cutting oil for difficult machining and deformation processing of various metals and alloys at automated and semi-automated machine tools, etc.
The analogue substitute:
Sulfofrezol
Advantages:
-it enhances quality of the processed surface on average by 1 roughness grade (as compared to the domestic analogues)
-cost advantages of 100 % and more when substituting oil cutting fluids of EU countries
-high lubricating properties ensure processing with high performance and tool durability
-it has no toxic properties inherent in sulfofresol
-it is fumeless during processing and does not deteriorate sanitary-hygienic labor conditions of machine-tool operators
-low coefficients of entrainment with cutting waste and decreased formation of oil mist provide optimal specific consumption
-long-life performance until replacement, including the effect of removed contamination and slurry sedimentation.
-it enhances quality of the processed surface on average by 1 roughness grade (as compared to the domestic analogues)
-cost advantages of 100 % and more when substituting oil cutting fluids of EU countries
-high lubricating properties ensure processing with high performance and tool durability
-it has no toxic properties inherent in sulfofresol
-it is fumeless during processing and does not deteriorate sanitary-hygienic labor conditions of machine-tool operators
-low coefficients of entrainment with cutting waste and decreased formation of oil mist provide optimal specific consumption
-long-life performance until replacement, including the effect of removed contamination and slurry sedimentation.
ASFOL-1 K Concentrated (1:5) cutting oil ASFOL-1
Standart class
Features:
Concentrated cutting oil ASFOL-1K provides obtaining ready-to-use cutting oil ASFOL-1 (cost-efficient cutting oil with high processing performance, tool durability and quality of the processed surface. Successfully substitutes foreign cutting oils.
Sphere of Use:
Concentrate (1:5) for preparation of multi-purpose cutting oil ASFOL-1 (applied during difficult machining and deformation processing of various metals and alloys at the automated and semi-automated machine tools, etc.). The concentrated ASFOL-1K is used as such during extremely loaded operations of cutting, drawing and plastic deformation of metals with high technical requirements.
Advantages:
-аpplication of “ASFOL-1K” reduces transportation costs and it provides funds saving by the value of oil component for dissolving
-іuccessful application of concentrated ASFOL-1K in extremely loaded operations of cutting, drawing and plastic deformation of metals
-aSFOL-1 prepared from the concentrated cutting oil increases quality of the processed surface on average by 1 roughness grade, as compared to the domestic analogues
-cost advantages achieve 100 % and more when substituting cutting oil of EU countries
-working solution of ASFOL-1 prepared from the concentrated ASFOL-1K possesses strong lubricating properties, ensuring the processing with high performance and tool durability
-it is fumeless during processing and does not deteriorate sanitary-hygienic labor conditions of machine-tool operators
-low coefficients of entrainment with cutting waste and decreased formation of oil mist provide optimal specific consumption
-аpplication of “ASFOL-1K” reduces transportation costs and it provides funds saving by the value of oil component for dissolving
-іuccessful application of concentrated ASFOL-1K in extremely loaded operations of cutting, drawing and plastic deformation of metals
-aSFOL-1 prepared from the concentrated cutting oil increases quality of the processed surface on average by 1 roughness grade, as compared to the domestic analogues
-cost advantages achieve 100 % and more when substituting cutting oil of EU countries
-working solution of ASFOL-1 prepared from the concentrated ASFOL-1K possesses strong lubricating properties, ensuring the processing with high performance and tool durability
-it is fumeless during processing and does not deteriorate sanitary-hygienic labor conditions of machine-tool operators
-low coefficients of entrainment with cutting waste and decreased formation of oil mist provide optimal specific consumption
NIKVOL-MM Process lubricant for cold pressurized deformation processing of metals
Standart class
Features:
High-efficient process lubricant for extremely loaded operations of drawing and plastic deformation of metals with high technical requirements.
Sphere of Use:
Multi-purpose lubricant for all types of cold pressurized processing of metals: rolling, drawing, pressing, extrusion molding, drawing, etc.
and for all types of processed metals: carbon; alloyed, heat-resistant and stainless steel grades; titanium, aluminum, copper and other non-ferrous alloys.
Advantages:
-it ensures considerable decrease of deformation force and high quality of the formed surface
-cold rolling of pipes made of 12Х18Н10Т steel grade provides increased linear displacement of metal by 30%, rolling mill yield by 30% and productability of the rolling process
-during aluminum drawing increase in reduction to size and processing performance achieves 100%
-remaining lubricant is easily removed with conventional detergents
-it is successfully applied at the high-technology leading plants of Ukraine.
-it ensures considerable decrease of deformation force and high quality of the formed surface
-cold rolling of pipes made of 12Х18Н10Т steel grade provides increased linear displacement of metal by 30%, rolling mill yield by 30% and productability of the rolling process
-during aluminum drawing increase in reduction to size and processing performance achieves 100%
-remaining lubricant is easily removed with conventional detergents
-it is successfully applied at the high-technology leading plants of Ukraine.
