Ready-to-use cutting oil for difficult machining and deformation processing.
Due to high lubricating and scuffing load capacity, this cutting oil is successful in drawing, gear and thread machining, and cold deformation of various metals.

Technological properties:
Turning-cutting processing
Deep hole drilling
Gear treatment
Knurling and threading
Drawing

Technological operations:
lathe turning, cutting, drilling, milling, thread cutting, reaming, gear machining, drawing, deformation processing

Processed materials:
low-alloyed steel grades, cast iron, high-alloyed steel grades, stainless steel grades, aluminum alloys, non-ferrous alloys

corresponds to the characteristics: Sulfofrezol

exceeds the characteristic: MR-3, MR-7, MR-11, MR-17, Ukrinol


PRICE:
WORKING SOLUTION, UAH / l: 44.10
The cutting oil is supplied ready-to-use

Сontainers:
canister, l: 10
barrel, l: 50, 200
Barrel used, l: 1000


Additional information
PHYSICAL AND CHEMICAL PROPERTIES ACCORDING TO DOCUMENTS :
Appearance brown to dark brown oily liquid
Smell characteristic, not irritating
Density at temperature (20+/-1) ºС, g/cm3 0,850-0,960
Viscosity by viscometer VZ-246 with a nozzle diameter of 4 mm at (20 +/- 1) ° C, s, not less than 10
Tests corrosive action on metals (steel) Braves
Pour point, ° C, not more than minus 9
Mass fraction of mechanical impurities,%, no more than 0.3
Flash point in open crucible, ° C, not less than 165
Kinematic viscosity at temperature (50 +/- 1) ° C, mm2 / s, not less than 5
Stability during storage of the liquid Braves
  • It enhances quality of the processed surface on average by 1 roughness grade (as compared to the domestic analogues)
  • Cost advantages of 100 % and more when substituting oil cutting fluids of EU countries
  • High lubricating properties ensure processing with high performance and tool durability
  • It has no toxic properties inherent in sulfofresol
  • It is fumeless during processing and does not deteriorate sanitary-hygienic labor conditions of machine-tool operators
  • Low coefficients of entrainment with cutting waste and decreased formation of oil mist provide optimal specific consumption
  • Long-life performance until replacement, including the effect of removed contamination and slurry sedimentation.

ASFOL-1 is an oil cutting fluid:

  • It is a solution based on mineral and vegetable oil doped with functional additives of foreign production.
  • Versatile in heavy conditions of machining of various metals and alloys in such operations as lathe turning, milling, drilling at the automated and semi-automated machine tools, etc. The cutting fluid is successfully used during drawing, gear and thread machining, and cold plastic deformation of metals.
  • It provides high processing behavior confirmed by plants, due to processing parts с minimal friction factor. It provides flushing and easy removal of cutting waste from the cutting zone, during deep drilling, as well.
  • In particular it is recommended as an efficient substitution of МР-7В cutting fluid in milling and shaving, deep drilling, automated lathe turning.
  • Owing to high lubricating capacity (as compared to МР-7В cutting fluid) it provides increase in tool durability on average by 1.5 times.
  • Process entrainment (with cutting waste and processed products) is decreased nearly by 25 %, which allows reducing purchases of cutting oil.
  • Roughness of the processed surface (as compared to the domestic analogues) is improved on average by 1 grade.
  • It provides improvement of sanitary-hygienic labor conditions of machine-tool operators by means of decreased formation of oil mist and absence of fuming in the operational zone.
  • According to toxico-hygienic evaluation the product refers to low hazardous substances (class 4 of hazard) in terms of severity of skin exposure and inhalation impact.
  • To save industrial costs the cutting oil may be delivered as concentrated ASFOL-1K and applied as 20 % additive, when working solution of ASFOL-1 is prepared by mechanical stirring of mineral oil (including recovered ones) and the concentrate. 
  • Cost advantages in case of substituting foreign cutting oil make more than 100 %.

<noindex>

GROUP BARKOR PROVIDES CONTINUOUS TECHNICAL SUPPORT FOR CUSTOMERS:

  • We ensure professional selection of products, which saves up to 30 % of the resources. The result of our manager’s work is not only a solution to technological problems, but also significant cost savings due to the use of our products.
  • We render assistance during product introduction. Our experts are always ready to address any issues related to application of our products in your business environment.
  • We provide service backup and testing using our own laboratory. If necessary, our laboratory will render laboratory services free of charge.
  • We are ready to modify our products under customer’s specifications. If necessary, we are ready to tackle your technical problem on an individual basis and modify the product specifically for your production process.
  • We provide free samples for testing.
  • We work quickly and efficiently – it takes us 30 minutes to issue an invoice and maximum 2 days to deliver products within the territory of Ukraine.
  • We sell products starting from 10 liters to a tank truck. 
  • Products are never out of stock.
  • We provide immediate expert advice on any issues arising during application of our products. We assign an experienced skilled professional for each customer. We are ready to visit your production facilities in an emergency.

</noindex>

why it is profitable
to work
with BARCOR-OIL?
Featured Products

UNIZOR-M Concentrated Synthetic Cutting Fluid

The analogue substitute: Sulfofrezol
Processed materials:
low-alloy steels, cast iron, high-alloy steels, stainless steels, aluminium alloys, non-ferrous alloys
Technological operations:
тurning, cutting, drilling, мilling, тhread cutting, deployment, polishing, deformation processing, hood, rolling, нydraulic fluid, wire drawing, production of electric welding pipe, honing, superfinish, lapping, preservation the interoperational 1-3 months., low foam washing, cleaning before coating
Technological properties
  • Lubricating
  • Cleaning
  • Corrosion preventing
  • Resistance to biological defeat
  • Stability on hard water
more

ROKSOL Concentrated Semi-Synthetic Cutting Fluid

The analogue substitute: Sulfofrezol
Processed materials:
low-alloy steels, cast iron, high-alloy steels, stainless steels, aluminium alloys, non-ferrous alloys
Technological operations:
тurning, cutting, drilling, мilling, тhread cutting, deployment, polishing, gear treatment, deformation processing, hood, rolling, нydraulic fluid, wire drawing, stamping, production of electric welding pipe, honing, superfinish, lapping, preservation the interoperational 1-3 months., low foam washing, cleaning before coating
Technological properties
  • Lubricating
  • Cleaning
  • Corrosion preventing
  • Resistance to biological defeat
  • Stability on hard water
more

TEHMOS - 2 Concentrated technical detergent

The analogue substitute: Sulfofrezol
Processed materials:
low-alloy steels, cast iron, high-alloy steels, stainless steels, aluminium alloys, non-ferrous alloys
Technological operations:
low foam washing, cleaning before coating, washing - active foam
Technological properties
  • Foaming characteristics
  • Detergent properties at low t
  • Corrosion preventing
  • Stability on hard water
  • Resistance to biological defeat
more
Over 1,000 companies trust us
AT "SCF Ukraine" (public)
PJSC "ArcelorMittal Krivoy Rog"
LLC "Interpipe Niko Tube"
JSC «Minsk Bearing Plant»
Ltd. "Motordetal-Konotop"
State Concern "Ukroboronprom"
PJSC "Novokramatorsk Engineering Works"
GP Research and Production Complex "Zorya" - "Mashproekt"
JSC "Motor Sich"
PJSC Kharkov Tractor Plant
JSC "Hydrosila GROUP"
State Enterprise "Gosudarstvennoye the Kiev KONSTRUKTORSKOE Bureau" Luch "
ДП "Завод ім. В.О. Малишева"
 The official government enterprise "NPK" Iskra "
PJSC "Sumy Frunze NPO"
Ltd. "VINNYTS'KYI ASSEMBLY PLANT"
PJSC "Kremenchug Wheel Plant"
PJSC "VAZ"
JSC "Minsk Wheel Tractor Plant"
PJSC "Druzhkovsky metiznyj plant"
Kharkiv plant «Mashgidroprivod»
JSC «Nowy Styl»
ТМ EPOS
State Enterprise Plant "Electrotyazhmash"
LLC "Azov Cable Company"