Water miscible coolants and industrial detergents

Do you want to quickly choose the right product for you?
use the product selection.
choose acc to characteristics choose according the analogue

EKOZOR Concentrated Synthetic Cutting Fluid

Economy class
Features: economic 4–5 % cutting fluid for standard conditions of machining (grinding in particular) and to be used as hydraulic fluid.
Sphere of Use: This cutting fluid is recommended for abrasive processing and machining of low and medium alloy steel grades.
The analogue substitute: Akvazor; Biol; Sintezor, CM-95, Lumol Акватэкс etc.
More free sample
Advantages:
- economic cooling lubricant at the stage of purchase;
- good cooling properties;
- minimal environmental impact;
- easy disposal, wastewater disposal allowed;
- low toxicity hazard;
- simple and easy preparation;
- non-segregating;
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.

UNIZOR-M Concentrated Synthetic Cutting Fluid

Standart class
Features: Is a well-known Ukrainian brand that has gained confidence of more than 700 regular customers. It is exported to Russia, Belarus, Moldova and EU countries.
Sphere of Use: Multi-purpose 3–5 % cutting fluid for various types of abrasive processing, edge-cutting machining, deformation processing of all steel grades and non-ferrous alloys. It is highly resistant to hard water and segregation.
More free sample
Advantages:
- аccording to the customer feedback: "fill-and-forget" – it ensures the long-life performance (without replacement), rot-proof;
- overprotects equipment and parts against corrosion, particularly in very hard water;
- increases processing performance (on average by 1.3 times);
- improves quality of the processed surface (by 1 roughness grade);
- non-segregating and requires only correction of decreasing quantities;
- easy disposal of the used cutting fluid, wastewater disposal allowed;
- concentrate is non-combustible and retains its properties at low temperatures;
- provides detergency effect for cleansing machine tool surfaces;
- provides in-process preservation of treated parts;
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.



UNIZOR-M , “Pipe” modification Concentrated Synthetic Cutting Fluid

Standart class
Features: It is used at more than 60 % facilities of this industry in Ukraine, exported to Moldova and Russia, “invisible” preservation not requiring depreservation.
Sphere of Use: 5 % working solution of cutting fluid provides the full cycle of manufacturing electric-welded pipes and full cycle of manufacturing electric-welded and shaped pipes, including their preservation for 1-3 months during warehouse storage and transportation
The analogue substitute: Alter Tube 0020
More free sample
Advantages:
- versatility (one solution for all stages of pipe production);
- high resistance of process tooling and stable dimensions of the formed section;
- considerable economic effect due to durable service without replacement;
- unique preservation properties, “invisible” preservation not requiring depreservation;
- finished articles comply with export requirements for rolled stock supply to EU countries;
- minimal specific consumption of the concentrate per 1 ton of pipes;
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.

RIMOL Concentrated Synthetic Cutting Fluid

Premium class
Features: Premium class synthetic cutting fluid with extra-long life and high technological properties. Cost-saving at the stage of usage.
Sphere of Use: Multi-purpose 3–5 % cutting fluid for all types of machining, including for very difficult-to-machine steel grades.
More free sample
Advantages:
- successful application at the high-technology leading plants of Ukraine,
- long-life performance up to 1 year and more,
- cost advantages at the stage of usage,
- concentrate is non-segregating and withstands low temperatures.
- possibility to process particularly difficult-to-machine steel grades (stainless, heat-resistant, tool) with high processing quality,
- reliable corrosion protection and bio-resistance, including in very hard water and with additives of NaCl,
- easy disposal of the used cutting fluids,
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.

RIMOL, modif eur Concentrated Synthetic Cutting Fluid

Premium class
Features: Cutting fluid of “premium” class having no specific odor, personnel-friendly. It is exported to the EU countries. Successfully substitutes cutting fluids of European brands.
Sphere of Use: Multi-purpose 4–5 % cutting fluid for various types of abrasive processing, edge-cutting machining, deformation processing of all steel grades and non-ferrous alloys.
More free sample
Advantages:
- 100 % and more cost advantage when substituting European cutting fluids;
- High: performance and technical characteristics of processing;
- Absence of characteristic odor and complaints of the operating personnel;
- Product quality is confirmed by the EU consumers;
- Non-segregating and bio-resistant;
- Absence of mineral oil in the composition provides easy disposal of the used cutting fluid;
- Additional cost advantages due to extended usage;
- Is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.

EcoEm -2 Concentrated Synthetic Coolant

Economy class
Features: synthetic microemulsion cutting fluid of "Economy class" for standard conditions of machining, of conventional white color
Sphere of Use: multi-purpose 3–5 % cutting fluid for various types of abrasive processing, edge-cutting machining, deformation processing of all kinds of steel grades and non-ferrous alloys.
More free sample
Advantages:
- "Economy class" cutting fluid offers cost advantages at the stage of purchase;
- High indices of processing performance during grinding;
- Absence of mineral oil in the composition provides easy disposal of the used emulsion;
- Increased anticorrosive characteristics;
- High resistance to hard water and segregation;
- Is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.

EkoEm -3 Concentrated Semi-Synthetic Coolant

Premium class
Features: The composition of the coolant corresponds to modern trends of European manufacturers. White emulsion habitual for the operating personnel, used for standard kinds of machining with prominent lubricating properties. Successfully used in operations of cutting and deformation processing, including for aluminum and non-ferrous alloys.
Sphere of Use: multi-purpose 5 % emulsion for various types of abrasive processing, edge-cutting machining, deformation processing of all kinds of steel grades and non-ferrous alloys.
More free sample
Advantages:
- prominent lubricating properties ensure high indicators of processing and tool durability during cutting and deformation processing;
- good processing of viscous aluminum and non-ferrous alloys;
- easy preparation and use;
- conventional white emulsion and favorable feedback of the operating personnel;
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.

EkoEm -1 Concentrated Semi-Synthetic Coolant

Standart class
Features: White emulsion habitual for the operating personnel, used for standard kinds of machining with prominent lubricating properties. Successfully used in operations of cutting and deformation processing, including for aluminum and non-ferrous alloys.
Sphere of Use: multi-purpose 4–5 % emulsion for various types of abrasive processing, edge-cutting machining, deformation processing of all kinds of steel grades and non-ferrous alloys.
More free sample
Advantages:
- prominent lubricating properties ensure high indicators of processing and tool durability during cutting and deformation processing;
- good processing of viscous aluminum and non-ferrous alloys;
- contains no nitrosating agents;
- easy preparation and use;
- conventional white emulsion and favorable feedback of the operating personnel;
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.

ROKSOL Concentrated Semi-Synthetic Cutting Fluid

Premium class
Features: Innovative cutting fluid of “premium class” has extra high lubricating properties due to lubrication synergism at the colloid, semi-colloid and chemical levels. But at the same time it has also excellent detergent properties. It provides reliable corrosion and biological protection.
Sphere of Use: Multi-purpose 3–5 % cutting fluid for various types of abrasive processing, edge-cutting machining, deformation processing of all kinds of steel grades and non-ferrous alloys. It substitutes the best cutting fluids of European manufacturers.
More free sample
Advantages:
- multi-purpose 3–5 % cutting fluid for various types of abrasive processing, edge-cutting machining, deformation processing of all kinds of steel grades and non-ferrous alloys,
- it substitutes the best cutting fluids of European manufacturers,
- is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the prohibition of use as a part of the coolant formaldehyde and boron salts.

EMOL®-O-CUT 202 E/25

Premium class
More free sample

EMOL-O-GRIND 104 E / 5

Premium class
More free sample

FERROBETOL-M Concentrated Mineral Cutting Fluid

Standart class
Features: High-quality emulsol with increased content of mineral oil (up to 65 %) and, respectively, extremely high lubricating properties. It provides increased processing speed and performance, as well as tool durability, in particular during difficult machining and deformation processing. To ensure the long-term service it is necessary to stir thoroughly the concentrated emulsol with water during preparation of the emulsion.
Sphere of Use: Multi-purpose emulsol for all types of difficult machining, including for deep drilling, milling, thread machining, wire drawing, deformation finning of pipes.
More free sample
Advantages:
-superior lubricating properties ensure high processing performance and tool durability during cutting and deformation processing
-successful processing of viscous aluminum, non-ferrous and stainless alloys
-it is applied for wire drawing in cable industry
-long-term service, corrosion and biological protection
-contains no nitrosating agents in its composition
-protective, sealing properties for processed products and operating personnel

ML – 5533/12

Premium class
More free sample

ML 6247

Premium class
More free sample

TEHMOS - 2 Concentrated technical detergent

Standart class
Features: High-efficient, low-foaming and low-temperature technical detergent
Sphere of Use: depreservation, cleansing, removal of stubborn stains in machine-building, preparation of parts for coating, during repair of railway equipment.
More free sample
Advantages:
-no need to heat the detergent solution and abrasive-mechanical action
-in-process anticorrosive protection of the cleaned parts
-low specific consumption and long-life performance
-it is certified as a biodegradable material and is easily disposed,
-low emulsifying capacity of oil impurities and contaminants that are easily removed from the solution surface,
-higher efficiency and quality of surface cleansing as compared to standard detergents,
-successful low-foaming washing in jet washing machines, including high pressure washers,
-provision of washing prior to apply electroplating, paint coatings and phosphatizing.

TEHMOS - 1 Concentrated technical detergent

Standart class
Features: Concentrated high-foaming detergent "Active foam" is designed to substitute more expensive foreign analogues
Sphere of Use: cleansing of motor vehicles, rail and ship transport, refrigeration facilities and containers from hard-to-remove contaminations.
More free sample
Advantages:
-efficient cleansing with "Active foam"
-cost advantages at the stage of purchase as compared to the foreign analogues
-it is certified as biodegradable material and is easily disposed
-the Ministry of Health approved application of this detergent for washing floors and equipment at the trading and catering facilities




Over 1,000 companies trust us
AT "SCF Ukraine" (public)
PJSC "ArcelorMittal Krivoy Rog"
LLC "Interpipe Niko Tube"
JSC «Minsk Bearing Plant»
Ltd. "Motordetal-Konotop"
State Concern "Ukroboronprom"
PJSC "Novokramatorsk Engineering Works"
GP Research and Production Complex "Zorya" - "Mashproekt"
JSC "Motor Sich"
PJSC Kharkov Tractor Plant
JSC "Hydrosila GROUP"
State Enterprise "Gosudarstvennoye the Kiev KONSTRUKTORSKOE Bureau" Luch "
ДП "Завод ім. В.О. Малишева"
 The official government enterprise "NPK" Iskra "
PJSC "Sumy Frunze NPO"
Ltd. "VINNYTS'KYI ASSEMBLY PLANT"
PJSC "Kremenchug Wheel Plant"
PJSC "VAZ"
JSC "Minsk Wheel Tractor Plant"
PJSC "Druzhkovsky metiznyj plant"
Kharkiv plant «Mashgidroprivod»
JSC «Nowy Styl»
ТМ EPOS
State Enterprise Plant "Electrotyazhmash"
LLC "Azov Cable Company"