RIMOL, modif eur

ТУ У 24.6-30309233-009-2003:

Premium concentrated multi-purpose cutting fluid for mechanical metal working.
4–5 % working solution has enhanced functional and operational characteristics, including absence of specific odor, typical of synthetic cutting fluids.
This cutting fluid is developed for the demanding EU market, where it is primarily exported to.
RIMOL, modif eur is consistent with recent changes in the EU legislation - EU Regulation №1907 / 2006 REACH and EU № 605/2014 regarding the using as a part of the coolant formaldehyde and boron salts.
RIMOL Euro modification substitutes in practice the best cutting fluids of European manufacturers.

Technological properties:
Lubricating
Cleaning
Corrosion preventing
Resistance to biological defeat
Stability on hard water

Technological operations:
various types of abrasive processing, edge-cutting machining, deformation processing of all steel grades and non-ferrous alloys.

Processed materials:
low-alloy steels, cast iron, high-alloy steels, stainless steels, aluminium alloys, non-ferrous alloys


PRICE:
CONCENTRATE, UAH / kg: 37.50 WORKING SOLUTION, UAH / l: from 1.50
Calculation for the concentration of 5%, excluding the cost of water

Сontainers:
canister, l: 10
barrel, l: 50, 200


Additional information
PHYSICAL AND CHEMICAL PROPERTIES ACCORDING TO DOCUMENTS :
Appearance light yellow to brown liquid
Smell characteristic, not irritating
Density at temperature (20+/-1) ºС, g/cm3 1,005-1,150
Relative viscosity as per ВЗ-246 viscosity meter with nozzle diameter 4 mm at temperature (20+/-1) ºС, sec, not less 10
Potential of hydrogen ion (рН) of water solution with the concentrate mass fraction 5 %, рН 9 units pH 8,2-9,99
Anticorrosive properties: (according to GOST 6243 cl.2). Working solution 5 %, mixed with water of 21 mmol/m3 hardness Braves
Water solution stability with 5 % concentrate mass fraction (layer separated on the solution surface within 3 hours), %, not more 1
Concentrate stability during storage withstands
  • 100 % and more cost advantage when substituting European cutting fluids;
  • High: performance and technical characteristics of processing;
  • Absence of characteristic odor and complaints of the operating personnel;
  • Product quality is confirmed by the EU consumers;
  • Non-segregating and bio-resistant;
  • Absence of mineral oil in the composition provides easy disposal of the used cutting fluid;
  • Additional cost advantages due to extended usage.

RIMOL, Euro modification is a concentrated synthetic cutting fluid of the European level for machining:

  • Top-priority development of the Academy of Sciences of Ukraine especially for the EU market.
  • Versatile for all types of machining - edge-cutting machining: lathe turning, milling, drilling, thread cutting, etc.; abrasive processing: grinding (including centerless grinding), super finishing, polishing, etc.
  • It is also applied during washing and depreservation of the parts.
  • Versatile for all types of processed metals and alloys: cast iron; carbon; alloyed – heat-resistant, tool and stainless steel grades; non-ferrous alloys.
  • It provides high processing behavior confirmed by the plants: performance improvement; tool durability; processed surface quality (on average by 1-2 quality grades, class of polishing – grinding finish).
  • Application of this cutting fluid eliminates intermediate technological operations and change-overs that became unnecessary and cuts production costs.
  • It protects equipment and parts against corrosion and provides detergency effect for cleansing machine tool surfaces.
  • According to the comparative testing certificates, it complies with the technical level of European cutting fluids and is cheaper by times.
  • Minimal environmental impact - synthetic cutting fluid contains no petroleum products – it is easily disposed providing cost advantages.
  • According to the conclusion of the Ministry of Health of Ukraine, used cutting fluid RIMOL can be discharged to the sewerage system.
  •  low toxicity hazard - according to the conclusion of the Ministry of Health of Ukraine, it is referred to class 4 of hazard.
  • Economically highly efficient - long-life performance without replacement (up to 1 year): bio-protected; non-segregating and requires only correction of decreasing quantities.
  • The concentrate is non-combustible; retains its properties at low temperatures.
  • The product quality is confirmed by certificates, expert conclusions and working experience of plants certified according to the ISO quality systems for automotive industry of the EU countries.
  • Simple and easy preparation: this cutting fluid is easily mixed with cold tap water in 5 % concentration. No heating, additional components and expenses is required.

<noindex>

GROUP BARKOR PROVIDES CONTINUOUS TECHNICAL SUPPORT FOR CUSTOMERS:

  • We ensure professional selection of products, which saves up to 30 % of the resources. The result of our manager’s work is not only a solution to technological problems, but also significant cost savings due to the use of our products.
  • We render assistance during product introduction. Our experts are always ready to address any issues related to application of our products in your business environment.
  • We provide service backup and testing using our own laboratory. If necessary, our laboratory will render laboratory services free of charge.
  • We are ready to modify our products under customer’s specifications. If necessary, we are ready to tackle your technical problem on an individual basis and modify the product specifically for your production process.
  • We provide free samples for testing.
  • We work quickly and efficiently – it takes us 30 minutes to issue an invoice and maximum 2 days to deliver products within the territory of Ukraine.
  • We sell products starting from 10 liters to a tank truck. 
  • Products are never out of stock.
  • We provide immediate expert advice on any issues arising during application of our products. We assign an experienced skilled professional for each customer. We are ready to visit your production facilities in an emergency.

</noindex>

why it is profitable
to work
with BARCOR-OIL?
Featured Products

ROKSOL Concentrated Semi-Synthetic Cutting Fluid

The analogue substitute:
Processed materials:
low-alloy steels, cast iron, high-alloy steels, stainless steels, aluminium alloys, non-ferrous alloys
Technological operations:
тurning, cutting, drilling, мilling, тhread cutting, deployment, polishing, gear treatment, deformation processing, hood, rolling, нydraulic fluid, wire drawing, stamping, production of electric welding pipe, honing, superfinish, lapping, preservation the interoperational 1-3 months., low foam washing, cleaning before coating
Technological properties
  • Lubricating
  • Cleaning
  • Corrosion preventing
  • Resistance to biological defeat
  • Stability on hard water
more

TEHMOS - 2 Concentrated technical detergent

The analogue substitute:
Processed materials:
low-alloy steels, cast iron, high-alloy steels, stainless steels, aluminium alloys, non-ferrous alloys
Technological operations:
low foam washing, cleaning before coating, washing - active foam
Technological properties
  • Foaming characteristics
  • Detergent properties at low t
  • Corrosion preventing
  • Stability on hard water
  • Resistance to biological defeat
more
Over 1,000 companies trust us
AT "SCF Ukraine" (public)
PJSC "ArcelorMittal Krivoy Rog"
LLC "Interpipe Niko Tube"
JSC «Minsk Bearing Plant»
Ltd. "Motordetal-Konotop"
State Concern "Ukroboronprom"
PJSC "Novokramatorsk Engineering Works"
GP Research and Production Complex "Zorya" - "Mashproekt"
JSC "Motor Sich"
PJSC Kharkov Tractor Plant
JSC "Hydrosila GROUP"
State Enterprise "Gosudarstvennoye the Kiev KONSTRUKTORSKOE Bureau" Luch "
ДП "Завод ім. В.О. Малишева"
 The official government enterprise "NPK" Iskra "
PJSC "Sumy Frunze NPO"
Ltd. "VINNYTS'KYI ASSEMBLY PLANT"
PJSC "Kremenchug Wheel Plant"
PJSC "VAZ"
JSC "Minsk Wheel Tractor Plant"
PJSC "Druzhkovsky metiznyj plant"
Kharkiv plant «Mashgidroprivod»
JSC «Nowy Styl»
ТМ EPOS
State Enterprise Plant "Electrotyazhmash"
LLC "Azov Cable Company"