NIKVOL-RO, ready-to-use low-viscous molding oil, is an analogue of European lubricants and profitably exceeds Ukrainian analogue in terms of operating parameters.
It is versatile for manufacturing all types of reinforced concrete products, is suitable for application with any kind of timbering in bench, conveyor, cassette, cast-in-place frame and other technologies.
It reliably provides high quality of finished products and mold cleanliness.

Technological properties:
Clean the surface of concrete
Purity of form
Protection against corrosion forms
Thrift application
Easy to use

Technological operations:
Lubricant for horizontal and vertical molds during manufacturing reinforced concrete products of improved quality.
Lubricant for all types of stand timbering during cast-in-place frame building.

Processed materials:
It is compatible with any kinds of molds (metal, wood, plastic, fiberglass). It is recommended especially for metal molds, since it contains a set of anti-corrosion agents and creates a protecting layer on surface, which noticeably reduces lubricant consumption during consequent application.

corresponds to the characteristics: SEPAREN,

exceeds the characteristic: AGAT-C3, and others.


PRICE:
Lubricant, UAH / liter: 41.70
The lubricant is delivered ready-to-use

Сontainers:
canister, l: 10
barrel, l: 50, 200


Additional information
PHYSICAL AND CHEMICAL PROPERTIES ACCORDING TO DOCUMENTS :
Appearance brown to dark brown oily liquid
Smell characteristic, not irritating
Density at temperature (20+/-1) ºС, g/cm3 0,8500-0,960.
Relative viscosity as per ВЗ-246 viscosity meter with nozzle diameter 4 mm at temperature (20+/-1) ºС, sec, not less 15
Tests of corrosion of metal (steel) Braves
Pour point, ° C, not above - 10.
Mass fraction of mechanical impurities,%, not more 0.5.
Flash point in open crucible, ° C, not below 190.
Kinematic viscosity at (50 +/- 1) ° C, mm 2 / s at least 7
The stability of the oil storage Braves
  • Easy stripping of products without jerking both in natural drying and steam curing
  • absence of concrete residue and corrosive scab on the mold surface
  • absence of lubricant penetration into concrete reducing its strength
  • absence of lubricant stains, segregations, chipping and pores
  • glossy finish
  • low specific consumption
  • easy application during spraying and high speed in mold surface preparation, including in “dead” areas
  • corrosion protection of steel shuttering
  • elimination of dependence on the weather conditions during operations in open air (as compared to emulsion lubricants)
  • wide temperature range of lubricant application: from -20 °С to +120 °С and possibility to work in winter season

NIKVOL-RO is a process lubricant for manufacturing reinforced concrete products of improved quality:

  • Process lubricant NIKVOL-RO is an analogue of European lubricants and profitably exceeds low-quality inefficient lubricants such as ECS, Agat, etc., based on used oil, in terms of operating parameters
  • Versatile for manufacturing all types of reinforced concrete products of improved quality: hollow slabs, external walling panels, cast stones, concrete sleepers, paving slabs, road kerbs, decorative concrete fences, bridge crossings and for manufacturing cast-in-place reinforced concrete structures.
  • Versatile for all types of production processes using bench, conveyor, cassette, cast-in-place frame and other technologies.
  • Due to decreased lubricant viscosity, in addition to usual methods of lubricant application it is possible to use even household spraying guns with working pressure of 3…4 atm.
  • NIKVOL-RO is used in processing horizontal and vertical surfaces of any structure; in this case the lubricant is well-retained and is not “washed out” with concrete.
  • In 10-15 cycles of lubricant application a protective micro-layer is formed on the mold surface, which reduces lubricant consumption in further operation, gradually cleans molds from old contamination (restoration effect) and improves quality of concrete products.

It provides high processing behavior confirmed by the plants:

  • easy stripping without jerking both in natural drying and steam curing
  • absence of concrete residue and corrosive scab on the mold surface
  • absence of lubricant penetration into concrete and reduction of its strength
  • absence of lubricant stains, segregations, chipping and pores
  • glossy finish.

NIKVOL-RO has high service characteristics:

  • low specific consumption and absence of necessity to add diesel oil and other components, which provides high efficiency of application;
  • easy application during spraying and high speed in mold surface preparation, including  in “dead” areas
  • corrosion protection of steel shuttering
  • elimination of dependence on the weather conditions during operations in open air (as compared to emulsion lubricants);
  • wide temperature range of lubricant application: from - 20 °С to +120 °С and possibility to work in winter season;

Cost advantages from substitution of lubricants imported from the EU countries make100 % and more already at the stage of purchase.

<noindex>

GROUP BARKOR PROVIDES CONTINUOUS TECHNICAL SUPPORT FOR CUSTOMERS:

  • We ensure professional selection of products, which saves up to 30 % of the resources. The result of our manager’s work is not only a solution to technological problems, but also significant cost savings due to the use of our products.
  • We render assistance during product introduction. Our experts are always ready to address any issues related to application of our products in your business environment.
  • We provide service backup and testing using our own laboratory. If necessary, our laboratory will render laboratory services free of charge.
  • We are ready to modify our products under customer’s specifications. If necessary, we are ready to tackle your technical problem on an individual basis and modify the product specifically for your production process.
  • We provide free samples for testing.
  • We work quickly and efficiently – it takes us 30 minutes to issue an invoice and maximum 2 days to deliver products within the territory of Ukraine.
  • We sell products starting from 10 liters to a tank truck. 
  • Products are never out of stock.
  • We provide immediate expert advice on any issues arising during application of our products. We assign an experienced skilled professional for each customer. We are ready to visit your production facilities in an emergency.

</noindex>

why it is profitable
to work
with BARCOR-OIL?
Featured Products

FERROBETOL-M RCP Concentrated emulsol for lubrication of molds in manufacturing reinforced concrete products

The analogue substitute: SEPAREN,
Processed materials:
composite materials
Technological operations:
lubrication of horizontal and vertical forms in the manufacture
Technological properties
  • Clean the surface of concrete
  • Purity of form
  • Protection against corrosion forms
  • Thrift application
  • Easy to use
more
Over 1,000 companies trust us
AT "SCF Ukraine" (public)
PJSC "ArcelorMittal Krivoy Rog"
LLC "Interpipe Niko Tube"
JSC «Minsk Bearing Plant»
Ltd. "Motordetal-Konotop"
State Concern "Ukroboronprom"
PJSC "Novokramatorsk Engineering Works"
GP Research and Production Complex "Zorya" - "Mashproekt"
JSC "Motor Sich"
PJSC Kharkov Tractor Plant
JSC "Hydrosila GROUP"
State Enterprise "Gosudarstvennoye the Kiev KONSTRUKTORSKOE Bureau" Luch "
ДП "Завод ім. В.О. Малишева"
 The official government enterprise "NPK" Iskra "
PJSC "Sumy Frunze NPO"
Ltd. "VINNYTS'KYI ASSEMBLY PLANT"
PJSC "Kremenchug Wheel Plant"
PJSC "VAZ"
JSC "Minsk Wheel Tractor Plant"
PJSC "Druzhkovsky metiznyj plant"
Kharkiv plant «Mashgidroprivod»
JSC «Nowy Styl»
ТМ EPOS
State Enterprise Plant "Electrotyazhmash"
LLC "Azov Cable Company"