NIKVOL-RO Lubricant for molds used in manufacturing reinforced concrete products
Standart class
Features:
The lubricant has a “memory effect” – in several cycles it forms a protective layer on the mold, which reduces specific consumption in future
Sphere of Use:
For lubrication of molds while manufacturing reinforced concrete products of improved quality
The analogue substitute:
SEPAREN,
Advantages:
-easy stripping of products without jerking both in natural drying and steam curing
-absence of concrete residue and corrosive scab on the mold surface
-absence of lubricant penetration into concrete reducing its strength
-absence of lubricant stains, segregations, chipping and pores
-glossy finish
-low specific consumption
-easy application during spraying and high speed in mold surface preparation, including in “dead” areas
-corrosion protection of steel shuttering
-elimination of dependence on the weather conditions during operations in open air (as compared to emulsion lubricants)
-wide temperature range of lubricant application: from -20 °С to +120 °С and possibility to work in winter season
-easy stripping of products without jerking both in natural drying and steam curing
-absence of concrete residue and corrosive scab on the mold surface
-absence of lubricant penetration into concrete reducing its strength
-absence of lubricant stains, segregations, chipping and pores
-glossy finish
-low specific consumption
-easy application during spraying and high speed in mold surface preparation, including in “dead” areas
-corrosion protection of steel shuttering
-elimination of dependence on the weather conditions during operations in open air (as compared to emulsion lubricants)
-wide temperature range of lubricant application: from -20 °С to +120 °С and possibility to work in winter season
FERROBETOL-M RCP Concentrated emulsol for lubrication of molds in manufacturing reinforced concrete products
Economy class
Features:
Concentrated mineral emulsol for lubrication of molds in manufacturing reinforced concrete products. The concentrate may be used as a basic component for “author” lubricants. The experience of the lubricant application by our customers shows stable achievement of high quality of mold surfaces, and accordingly of concrete products and general efficiency of application when alternating mold lubrication with Ferrobetol-M emulsion (5 times) periodically with NIKVOL-RO (1 time).
Sphere of Use:
Lubrication of molds in manufacturing reinforced concrete products
The analogue substitute:
AGAT, AGAT-F3, AGAT-BIO
Advantages:
-low specific consumption, efficient application
-easy preparation of the emulsion
-easy application on the molds by various methods: lubricating, spraying
-good quality of the formed articles
-low specific consumption, efficient application
-easy preparation of the emulsion
-easy application on the molds by various methods: lubricating, spraying
-good quality of the formed articles
